电话:186-2627-0123      info@dtmar.com 
当前所在位置: 首页 » 材料 » UNILATE

UNILATE™ IS OFTEN USED FOR:

  • Industrial machinery parts
  • equipment parts
  • manufacturing related
  • circuit boards
  • reinforcing board
  • sockets

PERFORMANCE CHARACTERISTICS:

  • High impact strength
  • Good machinability
  • Outstanding thermoforming characteristics

COMMON BRANDS:

  • UNILATE™
  • TPS®PBT
  • DO™ PET-P

TECHNICAL RESOURCES

  SCIGRIP® 4807 - Bonds Styrene
​  FDA Compliant Plastics
EXPLORE OTHER PRODUCTS & SERVICES

UNILATE™日本尿素板

为了防止成品的尺寸收缩。适合在温度超过80°C时要求、高尺寸稳定性的任何应用。

UNILATE™  是聚对苯二甲酸乙二醇酯(PET)树脂复合玻璃纤维、无机填料,如挤压成薄片,然后叠层热压。相对其他工程塑料,如尼龙和聚甲醛板,其更具有优良的耐热性,耐压,强度和加工性能的特点,其有着显著的改善吸水性和电性能,以及与热固性树脂层压板加工性能比较。

高抗冲聚苯乙烯材料选择

HIS Assembly – High impact polystyrene can be assembled with mechanical fasteners, solvents, or adhesives.

Good Printable Substrate – High impact polystyrene can be decorated using a variety of printing methods including screen printing, offset lithography, and flexography.

FDA Compliant Material – HIS sheet is available in FDA compliant grades.

Orfitrans™ Stiff High Impact Poly Sheet for O&P – is a material used for the production of check sockets and flexible sockets. It has good impact resistance, fatigue resistance, and moderate stiffness.

EXPLORE DUPONT™ VESPEL® SP POLYIMIDE MATERIALS
High strength, stiff, low friction engineering plastic with good wear properties.
High strength, stiff, low friction engineering plastic with good wear properties.
High strength, stiff, low friction engineering plastic with good wear properties.
High strength, stiff, low friction engineering plastic with good wear properties.
High strength, stiff, low friction engineering plastic with good wear properties.
High strength, stiff, low friction engineering plastic with good wear properties.

TYPICAL PROPERTIES OF HIGH IMPACT POLYSTYRENE

  UNITS ASTM
TEST
HOMOPOLYMER
ACETAL
COPOLYMER
ACETAL
TECAFORM®
HPV13
PTFE-FILLED
ACETAL
20% GLASS
FIBER FILLED
HOMOPOLYMER
ACETAL
Tensile strength psi D638 10,000 9,800 6,800 8,500
Flexural modulus psi D790 420,000 370,000 350,000 730,000
Izod impact (notched) ft-lbs/in
of notch
D256 1.5 1.0 0.7 0.8
Heat deflection
temperature
@ 264 psi
°F D648 257 230 244 316
Maximum continuous
service temperature
in air
°F   185 195 185 185
Water absorption
(immersion
24 hours)
% D570 0.25 0.20 0.22 0.25
Coefficient of
linear thermal
expansion
in/in/
°Fx10-5
D696 6.8 6.1 5.1 2.0 - 4.5
Coefficient of
friction (dynamic)
    0.20 0.21 0.12 0.35

Values may vary according to brand name. Please ask your Curbell Plastics representative for more specific information about an individual brand.
如果找不到您要的产品,可以通过邮箱联系我们info@dtmar.com

关于我们

产品

快速联系

© 2017-2019  苏州多特玛工程塑料有限公司  版权所有  苏ICP备17073533号  站点地图  苏州文旦设计制作