当前所在位置: 首页 » 材料 » PVDF

PVDF IS WIDELY USED FOR:

  • Chemical tank liners
  • Semiconductor equipment components
  • Fittings, seals, and gaskets
  • Pump and valve parts
  • Nozzles
  • Piping

PERFORMANCE CHARACTERISTICS:

  • High purity
  • Excellent chemical resistance
  • Easy to weld using thermoplastic
           welding equipment
  • Good UV stability
  • Flame resistant
  • Abrasion resistant

COMMON BRANDS:

  • Kynar®
  • SustaPVDF
  • TECAFLON®

TECHNICAL RESOURCES

  Chemical Resistance Chart
​  FDA Compliant Plastics
EXPLORE OTHER PRODUCTS & SERVICES

PVDF

High purity engineering plastic with excellent chemical, abrasion, and flame resistance

PVDF (polyvinylidene fluoride), often referred to by its trade name Kynar®, is a high purity engineering thermoplastic with excellent chemical resistance, abrasion resistance, flame resistance, and UV stability. PVDF is widely used for chemical tank liners and semiconductor equipment components. FDA compliant grades of PVDF are available.

PVDF MATERIAL OPTIONS

Homopolymer PVDF – has higher strength and stiffness and has a higher heat deflection temperature than copolymer PVDF. 

Copolymer PVDF – is less stiff but has superior impact and stress crack resistance.

EXPLORE DUPONT™ VESPEL® SP POLYIMIDE MATERIALS
High strength, stiff, low friction engineering plastic with good wear properties.
High strength, stiff, low friction engineering plastic with good wear properties.
High strength, stiff, low friction engineering plastic with good wear properties.
High strength, stiff, low friction engineering plastic with good wear properties.
High strength, stiff, low friction engineering plastic with good wear properties.
High strength, stiff, low friction engineering plastic with good wear properties.

TYPICAL PROPERTIES OF PVDF

  UNITS ASTM
TEST
HOMOPOLYMER
ACETAL
COPOLYMER
ACETAL
TECAFORM®
HPV13
PTFE-FILLED
ACETAL
20% GLASS
FIBER FILLED
HOMOPOLYMER
ACETAL
Tensile strength psi D638 10,000 9,800 6,800 8,500
Flexural modulus psi D790 420,000 370,000 350,000 730,000
Izod impact (notched) ft-lbs/in
of notch
D256 1.5 1.0 0.7 0.8
Heat deflection
temperature
@ 264 psi
°F D648 257 230 244 316
Maximum continuous
service temperature
in air
°F   185 195 185 185
Water absorption
(immersion
24 hours)
% D570 0.25 0.20 0.22 0.25
Coefficient of
linear thermal
expansion
in/in/
°Fx10-5
D696 6.8 6.1 5.1 2.0 - 4.5
Coefficient of
friction (dynamic)
    0.20 0.21 0.12 0.35

Values may vary according to brand name. Please ask your Curbell Plastics representative for more specific information about an individual brand.
如果找不到您要的产品,可以通过邮箱联系我们info@dtmar.com

关于我们

产品

快速联系

© 2017-2019  苏州多特玛工程塑料有限公司  版权所有  站点地图  苏州文旦设计制作